JDMCITY.COM

JDMCITY.COM (http://www.jdmcity.com/index.php)
-   Do It Yourself (DIY) (http://www.jdmcity.com/forumdisplay.php?f=30)
-   -   cv axle? (http://www.jdmcity.com/showthread.php?t=22908)

99eclipse 06/18/2012 07:41 PM

cv axle?
 
any tips or ideas to get a stuck cv axle out? i have tried everything i could possibly think of.. :explode:

P98 06/18/2012 08:05 PM

Re: cv axle?
 
I usually use a pry bar :thumbsup: but what have you tried?

99eclipse 06/18/2012 08:18 PM

Re: cv axle?
 
Quote:

Originally Posted by P98 (Post 293027)
I usually use a pry bar :thumbsup: but what have you tried?

tried prybar, prybar+hammer, cumalong, cumalong hooked to car with car pulling it, and a sliding hammer, and still nothing :hithead:

H22APWRD94 06/18/2012 08:48 PM

Re: cv axle?
 
Inner or outer joint?

99eclipse 06/18/2012 08:49 PM

Re: cv axle?
 
Quote:

Originally Posted by H22APWRD94 (Post 293035)
Inner or outer joint?

were its stuck in the trans

KA7_Legend 06/18/2012 11:54 PM

Re: cv axle?
 
Hmu. I got a. Slide hammer and fwd pully adapter. I can help u out

99eclipse 06/19/2012 08:58 AM

Re: cv axle?
 
Quote:

Originally Posted by KA7_Legend (Post 293071)
Hmu. I got a. Slide hammer and fwd pully adapter. I can help u out

only problem is you live 2hrs away..
but thanks for the offer :thumbsup:

P98 06/19/2012 09:25 AM

Re: cv axle?
 
come to ottumwa jessie :cheers: I will help :thumbsup:

KA7_Legend 06/19/2012 09:29 AM

Re: cv axle?
 
Dang. Lol. I know autozone rents out the same tools I use.

H22APWRD94 06/19/2012 10:50 AM

Re: cv axle?
 
Quote:

Originally Posted by 99eclipse (Post 293036)
were its stuck in the trans

With the inner joint, try taking out the other side and using a long thin flat blade and a hammer from the back side. Has worked for me when I sheared the male end off at the track. Had nothing to grab a hold of, so had to use that method.

99eclipse 06/19/2012 07:10 PM

Re: cv axle?
 
wow finally got it fixed and all put back together thanks for the help guys! :thumbsup:

KA7_Legend 06/19/2012 10:12 PM

Re: cv axle?
 
Which method did u end up using?

99eclipse 06/20/2012 11:28 AM

Re: cv axle?
 
Quote:

Originally Posted by KA7_Legend (Post 293238)
Which method did u end up using?

my farm tractor plus cumalong :roflmao:

dalawoi 06/21/2012 12:29 AM

Re: cv axle?
 
got her ready for map?

99eclipse 06/21/2012 05:25 PM

Re: cv axle?
 
Quote:

Originally Posted by dalawoi (Post 293388)
got her ready for map?

idk if i trust her to go that far..

one-cam 06/24/2012 12:12 PM

Re: cv axle?
 
Quote:

Originally Posted by 99eclipse (Post 293497)
idk if i trust her to go that far..

Sludgehammer works great also a torch would do the trick.. I know the dsm spindles get rusty inside and are close to impossible to get out.. If you can take it all off put it on something so you can get 1/2 good hits straight down at the top of it..


All times are GMT -6. The time now is 02:16 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.