What did you do to your civic today? - Page 3

tedo2007 · 01/29/2010, 10:49 AM

gabe, what color tweed u need?

gabebauman · 01/29/2010, 10:55 AM

Quote:

Originally Posted by tedo2007

gabe, what color tweed u need?

I used Nordic, (third one down on the left) in the picture below.

http://www.yourautotrim.com/prautw.html

mike03 · 01/29/2010, 11:20 AM

Almost sold my aem short ram intake.. going back to stock...

Later, hopefully, ill receive smoked amber corners and type r lip... CANNOT WAIT!!

jared50438 · 01/30/2010, 01:47 PM

assembled my G23/vtec motor 11.5 c/r 97mm stroke 87mm bore
forged je's
balance shafts removed
and a lot of other things
with my header should make well over 220 wheel,
and lots of tq for a honDAH 180+ range.

working on the wiring and cleaning all that up and then also finished tucking brake lines.

coming together

need to get parts or another h22 trans.

JustBrowsing · 01/30/2010, 06:29 PM

Quote:

Originally Posted by mike03

and type r lip... CANNOT WAIT!!

There was a 92-95 Type R civic?!? Dayum son post pictures. I cannot wait to see it.

erok · 01/30/2010, 09:11 PM

Quote:

Originally Posted by JustBrowsing

There was a 92-95 Type R civic?!? Dayum son post pictures. I cannot wait to see it.

yeah there is just look on ebay!

Bill · 01/31/2010, 03:48 AM

Quote:

Originally Posted by JustBrowsing

There was a 92-95 Type R civic?!? Dayum son post pictures. I cannot wait to see it.

its a type r "style" lip

mike03 · 01/31/2010, 01:22 PM

Quote:

Originally Posted by JustBrowsing

There was a 92-95 Type R civic?!? Dayum son post pictures. I cannot wait to see it.

LOL naww man..

I totally wish i did!! but its a front lip"type r" style.. i will post some pics once i recieve it and install it..

but i cant get my pics thru this computer

OH, i washed my civic yesterday

mike03 · 01/31/2010, 02:41 PM

Here's my lower tie bar...

... and my beauty

pics came out bad

mike03 · 01/31/2010, 03:00 PM

my high performance sticker... it gave me a 15% hp

DOMO!!!!

saluting my puertorican flag

importsusa · 01/31/2010, 04:26 PM

how much did you spend on that Mike??

gabebauman · 01/31/2010, 06:49 PM

Removed the lower heat shield part from my catalytic converter because it came loose and was draggin' along the road on the way home last night.

While I was under there...I noticed why my exhaust was making a terrible clunking noise, the two rubber hangers right behind the resonator had been knocked free from the mounting points on the exhaust piping...so I hooked those back up too. I'm pretty sure all this stemmed from a hard snow chunk I ran over on my street the other morning.

mike03 · 02/01/2010, 01:12 PM

Quote:

Originally Posted by importsusa

how much did you spend on that Mike??

Domo was like 7 bucks

Shocker was like 5
forgot the size it came...

Puertorican flag, i stole from my sister... SHHHHHHHHHHHHHHh dont tell no one

lower tie bar my buddy was trying it for his ek hatch and didnt fit, so i snatched it from him and tried it on.. i didnt want it for free so i gave him 20..

mike03 · 02/01/2010, 01:15 PM

Waiting for my lip and corners... cant wait to try em.. Thanks again Deneil

next is stock air box, and later find some mud flaps..

importsusa · 02/01/2010, 02:13 PM

p

Quote:

Originally Posted by mike03

Domo was like 7 bucks

Shocker was like 5
forgot the size it came...

Puertorican flag, i stole from my sister... SHHHHHHHHHHHHHHh dont tell no one

lower tie bar my buddy was trying it for his ek hatch and didnt fit, so i snatched it from him and tried it on.. i didnt want it for free so i gave him 20..

ouch man, I am callin rip off that one.....for 7 bucks I could of made ya one like 10-12 inches tall by whatever in width. Anyways.....you better get these performance decals from me next time, help a Rican out yo....LOL

Just for buying those I should tell your sister about the stolen flag...LOL

erok · 02/01/2010, 04:58 PM

Put some new tein coilovers on my hatch. Then I opened the garage door to see that it was snowing :thumbsdow:

LowNsloEJ6 · 02/01/2010, 05:19 PM

Quote:

Originally Posted by erok

Put some new tein coilovers on my hatch. Then I opened the garage door to see that it was snowing :thumbsdow:

what suspension did you have on there? btw i seen you leavin the place you live in the hatch last weekend? those wheels you re polished look sickk

erok · 02/01/2010, 11:28 PM

Quote:

Originally Posted by streetglowjoe

what suspension did you have on there? btw i seen you leavin the place you live in the hatch last weekend? those wheels you re polished look sickk

thanks. I had some kyb basic shocks and for springs i had some skunk2 coilovers in rear and sprint lowering springs in front. I already got rid of them to my buddy tonite just have the rear kybs left in good shape if anyone wants them cheap lmk.

passwordjdmef9 · 02/02/2010, 07:46 AM

nice upgrade erok, what model are they basic, super street, flexs... lol

erok · 02/02/2010, 07:51 AM

Thanks man. I bought some bnib Tein basics off a guy locally. The basics are fine with me since they are pretty much the same as rest of Teins lineup except no damping adjustment...just stiff as hell lol

passwordjdmef9 · 02/02/2010, 07:54 AM

yeah theyre very nice had them on a crx back in the day loved em. did yours come with the upper mount? i had to use my oem one which i wasnt to thrilled about but all in all great product on a even nicer hatch.

gabebauman · 02/02/2010, 07:54 AM

Quote:

Originally Posted by erok

Thanks man. I bought some bnib Tein basics off a guy locally. The basics are fine with me since they are pretty much the same as rest of Teins lineup except no damping adjustment...just stiff as hell lol

Post some pix yet?

erok · 02/02/2010, 07:56 AM

Quote:

Originally Posted by gabebauman

Post some pix yet?

No pics yet. Pretty much same ride height and now my car is damn dirty since I have driven it recently. Hopefully once roads clear up a bit I will go wash it. Cant wash your ride to much in the winter

erok · 02/02/2010, 07:59 AM

Quote:

Originally Posted by passwordjdmef9

yeah theyre very nice had them on a crx back in the day loved em. did yours come with the upper mount? i had to use my oem one which i wasnt to thrilled about but all in all great product on a even nicer hatch.

yeah I had to re use my oem ones but have some groundcontrol ones lined up. Think they should work.

passwordjdmef9 · 02/02/2010, 08:07 AM

i think you can buy tein top hats

01/29/2010, 10:49 AM	#51
tedo2007 JDM Soldier Join Date: Apr 2009 Location: Oelwein, Ia Posts: 146	Re: What did you do to your civic today? gabe, what color tweed u need?

01/29/2010, 11:20 AM	#53
mike03 JDM King Join Date: Jan 2009 Location: Des Moines, IA Posts: 1,303	Re: What did you do to your civic today? Almost sold my aem short ram intake.. going back to stock... Later, hopefully, ill receive smoked amber corners and type r lip... CANNOT WAIT!! __________________ DD: 00' Civic Ex 94' Honda Civic Ex - sold

01/30/2010, 01:47 PM	#54
jared50438 JDM Knight Join Date: Oct 2007 Location: garner/mason city, iowa Posts: 735	Re: What did you do to your civic today? assembled my G23/vtec motor 11.5 c/r 97mm stroke 87mm bore forged je's balance shafts removed and a lot of other things with my header should make well over 220 wheel, and lots of tq for a honDAH 180+ range. working on the wiring and cleaning all that up and then also finished tucking brake lines. coming together need to get parts or another h22 trans. __________________ 2002 sebring silver s2000 inlinepro kit w/gt35r r200 diff kit http://www.jdmcity.com/showthread.ph...361#post221361 1997 TYPE R Cloneish build http://jdmcity.com/showthread.php?t=15798 '93 civic vx g23 12:1 e85

01/31/2010, 02:41 PM	#59
mike03 JDM King Join Date: Jan 2009 Location: Des Moines, IA Posts: 1,303	Re: What did you do to your civic today? Here's my lower tie bar... ... and my beauty pics came out bad __________________ DD: 00' Civic Ex 94' Honda Civic Ex - sold

01/31/2010, 03:00 PM	#60
mike03 JDM King Join Date: Jan 2009 Location: Des Moines, IA Posts: 1,303	Re: What did you do to your civic today? my high performance sticker... it gave me a 15% hp DOMO!!!! saluting my puertorican flag __________________ DD: 00' Civic Ex 94' Honda Civic Ex - sold

01/31/2010, 04:26 PM	#61
importsusa Vinyl Specialist Join Date: Sep 2009 Location: South DSM,IA Posts: 2,868	Re: What did you do to your civic today? how much did you spend on that Mike?? __________________ come check us out..............

01/31/2010, 06:49 PM	#62
gabebauman DR. DIY Join Date: Feb 2007 Location: DSM, IA Posts: 4,314	Re: What did you do to your civic today? Removed the lower heat shield part from my catalytic converter because it came loose and was draggin' along the road on the way home last night. While I was under there...I noticed why my exhaust was making a terrible clunking noise, the two rubber hangers right behind the resonator had been knocked free from the mounting points on the exhaust piping...so I hooked those back up too. I'm pretty sure all this stemmed from a hard snow chunk I ran over on my street the other morning. __________________ FOR SALE> http://www.jdmcity.com/showthread.php?t=3858 CLICK IT> http://gabusface.blogspot.com/ PS: I cut holes in fenders...pm me.

02/01/2010, 01:15 PM	#64
mike03 JDM King Join Date: Jan 2009 Location: Des Moines, IA Posts: 1,303	Re: What did you do to your civic today? Waiting for my lip and corners... cant wait to try em.. Thanks again Deneil next is stock air box, and later find some mud flaps.. __________________ DD: 00' Civic Ex 94' Honda Civic Ex - sold

02/01/2010, 04:58 PM	#66
erok F.T.C. Join Date: Mar 2007 Location: Des Moines Posts: 1,826	Re: What did you do to your civic today? Put some new tein coilovers on my hatch. Then I opened the garage door to see that it was snowing :thumbsdow:

02/02/2010, 07:51 AM	#70
erok F.T.C. Join Date: Mar 2007 Location: Des Moines Posts: 1,826	Re: What did you do to your civic today? Thanks man. I bought some bnib Tein basics off a guy locally. The basics are fine with me since they are pretty much the same as rest of Teins lineup except no damping adjustment...just stiff as hell lol