![]() |
![]() |
#1 |
JDM Lover
![]() Join Date: Nov 2011
Posts: 72
|
![]()
I have 1996 acura 3.2tl with factory alarm but an after market remote and im trying to program the remote. I was given 2 different instructions. One of the instructions says the doors will lock and unlock to let me know im in program mode. But all the car does is beep not lock unlock. So do I have the right programming?? Or do I have the wrong programs?? Any and all help is appreciated. Thanks
Last edited by maymay; 04/04/2012 at 05:30 PM.
|
![]() |
![]() |
#2 |
...
![]() Join Date: Mar 2009
Posts: 2,478
|
![]()
Pm jdmb18hatch on here. He can help you out with that.
|
![]() |
![]() |
#3 |
JDM Lover
![]() Join Date: Nov 2011
Posts: 72
|
![]()
sweet thanks!
|
![]() |
![]() |
#4 |
JDM Lover
![]() Join Date: Nov 2011
Posts: 72
|
![]()
anyone else have imput on this? im going to work on this car this weekend. thanks again
|
![]() |
![]() |
#5 |
JDM Lover
![]() Join Date: Nov 2011
Posts: 72
|
![]()
ok, bought a original equipment remote and i still cant get the car to go into program mode... had the remote tested at my job and it putting out a signal but just cant get the car into program mode.
|
![]() |
![]() |
#6 |
JDM Lover
![]() Join Date: Nov 2011
Posts: 72
|
![]()
if my driver side door actuator is possibly bad, could that be part of my problem with my car not going into program mode?? the door lock grinds when hitting the unlock button
|
![]() |
![]() |
#7 | |
JDM Lover
![]() Join Date: Nov 2011
Posts: 72
|
![]() Quote:
bump |
|
![]() |
![]() |
#8 |
JDM Lover
![]() Join Date: Nov 2011
Posts: 72
|
![]()
this shits pissin me off. ive tried different program methods and nothing is working. do i need a different key? im sure this key isnt the original. its gold. is there a fuse or something else i should look for? ive bought 2 remotes and neither are working. the security light will blink if i lock the doors along with the stereo. BUT NO PROGRAMMING!!!
|
![]() |
![]() |
Thread Tools | |
|
|