JDMCITY.COM
Advertise with us!

Go Back   JDMCITY.COM > Technical Forum > Drag/AutoX/Road Course Racing

Reply
 
Old 01/07/2013, 09:25 PM   #1
99eclipse
JDM King
 
99eclipse's Avatar
 
99eclipse is offline
Join Date: Aug 2011
Location: Moravia Iowa
Posts: 1,129

 
Default SPEC CLUTCH

whose using them?
what kind of power are you putting down?
how are they holding up?
what stage do you have?

  Reply With Quote
Old 01/07/2013, 11:54 PM   #2
H22APWRD94
The Tranny Guy
 
H22APWRD94 is offline
Join Date: May 2007
Posts: 2,007

 
Default Re: SPEC CLUTCH

SPEC makes a good clutch. Make sure you get one that can handle the torque that you are going to put down. 2nd gear burnouts on slicks require a decent clutch. I personally recommend an unsprung setup. Little less slop, and won't see as much breakage.

  Reply With Quote
Old 01/08/2013, 12:04 AM   #3
99eclipse
JDM King
 
99eclipse's Avatar
 
99eclipse is offline
Join Date: Aug 2011
Location: Moravia Iowa
Posts: 1,129

 
Default Re: SPEC CLUTCH

I got the stage 3+ with the 6 puck im just nervous that its not gonna hold up to what im wanting to do with the car, just dont wanna put my new trans, clutch an lsd in then have to pull it all back apart because of the clutch, ive just read some bad reviews on the spec clutch that are making me a little nervous,

  Reply With Quote
Old 01/08/2013, 04:09 PM   #4
H22APWRD94
The Tranny Guy
 
H22APWRD94 is offline
Join Date: May 2007
Posts: 2,007

 
Default Re: SPEC CLUTCH

I am running an Action 2MD pressure plate with an ACT 6 puck unsprung disc. Made around 350ft-lbs of torque on the dyno. Never have had any slippage issues. And this pressure plate has been beat on before I got it. Was in Adi's old hatch, the red CRX, and now the sedan.

  Reply With Quote
Old 01/08/2013, 07:31 PM   #5
99eclipse
JDM King
 
99eclipse's Avatar
 
99eclipse is offline
Join Date: Aug 2011
Location: Moravia Iowa
Posts: 1,129

 
Default Re: SPEC CLUTCH

Quote:
Originally Posted by H22APWRD94 View Post
I am running an Action 2MD pressure plate with an ACT 6 puck unsprung disc. Made around 350ft-lbs of torque on the dyno. Never have had any slippage issues. And this pressure plate has been beat on before I got it. Was in Adi's old hatch, the red CRX, and now the sedan.
i didnt know hondas made torque,
and ok that makes me fell alot better, just dont wanna be wasting my time an money!

  Reply With Quote
Old 01/17/2013, 12:35 AM   #6
Tommy
...
 
Tommy is offline
Join Date: Mar 2009
Posts: 2,478

 
Default Re: SPEC CLUTCH

Quote:
Originally Posted by 99eclipse View Post
i didnt know hondas made torque,
and ok that makes me fell alot better, just dont wanna be wasting my time an money!
Made 386 @20 psi.

  Reply With Quote
Old 01/17/2013, 07:49 AM   #7
99eclipse
JDM King
 
99eclipse's Avatar
 
99eclipse is offline
Join Date: Aug 2011
Location: Moravia Iowa
Posts: 1,129

 
Default Re: SPEC CLUTCH

Quote:
Originally Posted by Tommy View Post
Made 386 @20 psi.
Thats not to bad, thats the same exact psi an whp im shooting for around when i retune here soon

  Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -6. The time now is 11:54 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.