Another PLASTI-DIP Thread! Hope You like PINK

kptrulee · 02/02/2013, 03:03 PM

To plasti dip or not?? Well, I decided to plasti dip my wife's winter wheels because I wanted to spice up her new ride and also get some first hand experience with plasti dip and the whole craze going on with it.
Well enough with the small talk
Most colors are going to have to be ordered online or through a store that carries plasti dip. I ordered the blaze pink and the pearlizer from dipyourcar.com and I bought the white plasti dip from Lowes. I believe Ace Hardware also carries it.

Here are the wheels pre dipped. Sanded some areas that had some corrosion going on and cleaned them up with soap, water and some alcohol wipes. Not perfect but a lot better than when I first got them.

Taped off the valve stems and also in the lug nut holes. I used some index cards to block off the tires. This is all preference. I have heard of many people not doing anything to block the tires as they say the plasti dip will just rub off. I would recommend taping off the lug nut holes as if you dont I have seem some pics of people mounting them and having the plasti dip around the lug nuts start to come off as the lug nuts are tightened.

For the blaze colors it is recommended that you use a white base coat otherwise it seems like the blaze colors dont come out as bright.
Here are the wheels after 2 light coats. I waited a couple minutes in between each coat.
Once again its all preference. I did a lot of light coats. Some people have done heavier coats with less coats applied.

This is the after about 4 light coats of the white. Now Im ready to spray on the Blaze Pink.

A couple light coats of the Pink. Wow thats bright

Here's how it looked after about 5 light coats. SUPAH PINK!

I started adding some pearlizer to the wheels. I was mixing the pearlizer and the pink together by spraying them simultaneously, crossing streams, and having them mix in midair (DONT CROSS STREAMS....lol jk!!)

FINISHED PRODUCT

I lightly dusted the wheels at the very end with just the pearlizer. You can spray that on how many times you want to get the effect you are looking for. And dont forget to pull off the tape around the vavle stems and lug nut holes before it completely dries or the plasti dip can peel off with the tape.
Sorry for the poor lighting.

No flash with a little better lighting

All pics were taken with my Iphone so sorry for not having the best quality images.
I will try and get some pictures of the wheels on my wifes Fit.
Yep, she is rocking a Fit! GE8
Has been through this past snow storm and so far its holding up well. I will try and get pics of the wheels on her car soon.
Hope this thread helps people get a little more info about plasti dip.

ChunKy · 02/03/2013, 09:04 PM

thanks for the website! i been trying to look where i can buy color ones online

V8ReiM3R88MaRo · 02/04/2013, 07:39 PM

Looks good, I LOVE plasti-dip, I have my wheels and bumper done on my silvy.

deadmoans · 02/05/2013, 06:30 PM

NICE!!! I wonder what the durability of that stuff is??? Let us know as the winter goes on.

Plus, I liked the Ghost Busters reference.

kptrulee · 02/25/2013, 06:33 AM

Quote:

Originally Posted by deadmoans

NICE!!! I wonder what the durability of that stuff is??? Let us know as the winter goes on.

Plus, I liked the Ghost Busters reference.

Haha thanks. So far the wheels are holding up great. I still haven't taken any pics of them on the car yet. Will try to if I remember

gabebauman · 03/11/2013, 12:45 PM

Plan on doing this to my winter wheels after I take them off this spring. Minus the PINK though.

kptrulee · 03/13/2013, 07:48 AM

no pink for you gabus??
I plasti dipped my winter wheels black. I'll post them up soon

eurorider1 · 03/25/2013, 04:35 PM

kptruelee is that you? do you still got the blue integra? with jdm front end?

cdcEGcivic · 04/18/2013, 07:48 PM

Does your wife drive a honda fit? I told her nice wheels when she came into my caseys over here in west des Moines. Looks dope!

kptrulee · 04/19/2013, 09:31 AM

i sold both my blue integras with jdm fronts
and yes she does, she drives a 2009 Honda Fit in the Tidewater metallic Blue

99TegB20 · 12/02/2013, 08:51 PM

Thumbs up! Look great!

gabebauman · 12/03/2013, 07:40 PM

I've seen your wife in the fit at Dukin Donuts twice. We usually stop there on Sunday mornings on the way to church.

02/02/2013, 03:03 PM	#1
kptrulee JDM Knight Join Date: Jun 2007 Location: Iowa Posts: 993	Another PLASTI-DIP Thread! Hope You like PINK To plasti dip or not?? Well, I decided to plasti dip my wife's winter wheels because I wanted to spice up her new ride and also get some first hand experience with plasti dip and the whole craze going on with it. Well enough with the small talk Most colors are going to have to be ordered online or through a store that carries plasti dip. I ordered the blaze pink and the pearlizer from dipyourcar.com and I bought the white plasti dip from Lowes. I believe Ace Hardware also carries it. Here are the wheels pre dipped. Sanded some areas that had some corrosion going on and cleaned them up with soap, water and some alcohol wipes. Not perfect but a lot better than when I first got them. Taped off the valve stems and also in the lug nut holes. I used some index cards to block off the tires. This is all preference. I have heard of many people not doing anything to block the tires as they say the plasti dip will just rub off. I would recommend taping off the lug nut holes as if you dont I have seem some pics of people mounting them and having the plasti dip around the lug nuts start to come off as the lug nuts are tightened. For the blaze colors it is recommended that you use a white base coat otherwise it seems like the blaze colors dont come out as bright. Here are the wheels after 2 light coats. I waited a couple minutes in between each coat. Once again its all preference. I did a lot of light coats. Some people have done heavier coats with less coats applied. This is the after about 4 light coats of the white. Now Im ready to spray on the Blaze Pink. A couple light coats of the Pink. Wow thats bright Here's how it looked after about 5 light coats. SUPAH PINK! I started adding some pearlizer to the wheels. I was mixing the pearlizer and the pink together by spraying them simultaneously, crossing streams, and having them mix in midair (DONT CROSS STREAMS....lol jk!!) FINISHED PRODUCT I lightly dusted the wheels at the very end with just the pearlizer. You can spray that on how many times you want to get the effect you are looking for. And dont forget to pull off the tape around the vavle stems and lug nut holes before it completely dries or the plasti dip can peel off with the tape. Sorry for the poor lighting. No flash with a little better lighting All pics were taken with my Iphone so sorry for not having the best quality images. I will try and get some pictures of the wheels on my wifes Fit. Yep, she is rocking a Fit! GE8 Has been through this past snow storm and so far its holding up well. I will try and get pics of the wheels on her car soon. Hope this thread helps people get a little more info about plasti dip.

02/03/2013, 09:04 PM	#2
ChunKy my mexico Join Date: Apr 2007 Location: dead grass land Posts: 4,365	Re: Another PLASTI-DIP Thread! Hope You like PINK thanks for the website! i been trying to look where i can buy color ones online __________________ blah

02/05/2013, 06:30 PM	#4
deadmoans JDM Knight Join Date: Feb 2008 Location: Des Moines Posts: 589	Re: Another PLASTI-DIP Thread! Hope You like PINK NICE!!! I wonder what the durability of that stuff is??? Let us know as the winter goes on. Plus, I liked the Ghost Busters reference. __________________ Cheap, Fast or Reliable, You Can Only Choose Two.

03/11/2013, 12:45 PM	#6
gabebauman DR. DIY Join Date: Feb 2007 Location: DSM, IA Posts: 4,314	Re: Another PLASTI-DIP Thread! Hope You like PINK Plan on doing this to my winter wheels after I take them off this spring. Minus the PINK though. __________________ FOR SALE> http://www.jdmcity.com/showthread.php?t=3858 CLICK IT> http://gabusface.blogspot.com/ PS: I cut holes in fenders...pm me.

03/13/2013, 07:48 AM	#7
kptrulee JDM Knight Join Date: Jun 2007 Location: Iowa Posts: 993	Re: Another PLASTI-DIP Thread! Hope You like PINK no pink for you gabus?? I plasti dipped my winter wheels black. I'll post them up soon

03/25/2013, 04:35 PM	#8
eurorider1 JDM Lover Join Date: Mar 2012 Posts: 98	Re: Another PLASTI-DIP Thread! Hope You like PINK kptruelee is that you? do you still got the blue integra? with jdm front end?

04/18/2013, 07:48 PM	#9
cdcEGcivic JDM Lover Join Date: Jun 2011 Location: Des Moines, Iowa Posts: 68	Re: Another PLASTI-DIP Thread! Hope You like PINK Does your wife drive a honda fit? I told her nice wheels when she came into my caseys over here in west des Moines. Looks dope!

04/19/2013, 09:31 AM	#10
kptrulee JDM Knight Join Date: Jun 2007 Location: Iowa Posts: 993	Re: Another PLASTI-DIP Thread! Hope You like PINK i sold both my blue integras with jdm fronts and yes she does, she drives a 2009 Honda Fit in the Tidewater metallic Blue

12/02/2013, 08:51 PM	#11
99TegB20 Newbie Join Date: Nov 2013 Location: Norwalk,IA Posts: 9	Thumbs up! Look great!

12/03/2013, 07:40 PM	#12
gabebauman DR. DIY Join Date: Feb 2007 Location: DSM, IA Posts: 4,314	Re: Another PLASTI-DIP Thread! Hope You like PINK I've seen your wife in the fit at Dukin Donuts twice. We usually stop there on Sunday mornings on the way to church. __________________ FOR SALE> http://www.jdmcity.com/showthread.php?t=3858 CLICK IT> http://gabusface.blogspot.com/ PS: I cut holes in fenders...pm me.