![]() |
![]() |
#1 |
JDM Lover
![]() Join Date: Jun 2010
Location: Ames,IA
Posts: 88
|
![]()
Hey guys I need some help, I bought a "type r " wing from a guy on here. Well I went to put it on my 95 gsr and the holes dont line up at all. He told me I need to drill new holes. Is this correct or did I get screwed
__________________ when the turbo spins the bullshit ends. VTEC all day!!! well till you run out of oil. |
![]() |
![]() |
#2 |
JDM Soldier
![]() Join Date: Feb 2010
Location: Cedar Rapids, IA
Posts: 254
|
![]()
drill new holes..
![]() |
![]() |
![]() |
#3 |
JDM Lover
![]() Join Date: Jun 2010
Location: Ames,IA
Posts: 88
|
![]()
I dont wanna rig it. I want the real deal
__________________ when the turbo spins the bullshit ends. VTEC all day!!! well till you run out of oil. |
![]() |
![]() |
#4 |
JDM Knight
![]() Join Date: Sep 2008
Posts: 562
|
![]()
Only way your going to get the real deal is to get an actual Type R Trunk with the holes.
I know mine came with a GSR wing with a 3rd Brake Light. When I removed it, it had left an extra hole for the 3rd brake light that I filled in. __________________ Koi Kang ![]() |
![]() |
![]() |
#5 |
JDM Soldier
![]() Join Date: Nov 2010
Location: Des Moines
Posts: 414
|
![]()
A true Type R wing should fit within the holes used on the Gsr trunk lid.
When I purchased a Type R wing that was told to me to be authentic it didn't need any modifications to fit at all. The nut fit perfectly into the holes. I also thought that I a true type R wing had the H logo or Honda written somewhere on the underneath? |
![]() |
![]() |
Thread Tools | |
|
|